Tool 14: Spoof

Description:

  This tool reads packets stored in a record, and send them to the
  network.
  
  Parameter --file indicates the record filename.
  Parameter --dlt defines the DLT of packets in record (it depends on
  how it was sniffed, generally 'ether' (for Ethernet) or 'raw' (if
  packet starts at IP header)). Full list is available through netwag or
  running tool 12.
  If dlt is not raw, parameter --device indicates the device to use.
  If dlt is raw, parameter --spoofip indicates how to send packets.

Synonyms:

capture, frame

Usage:

netwox 14 -f file [-t dlt] [-s|+s] [-k|+k] [-d device] [-i spoofip]

Parameters:

parameter	description	example
`-f\|--file file`	read from record file	srcfile.txt
`-t\|--dlt dlt`	dlt type of data stored in record	ether
`-s\|--screen\|+s\|--no-screen`	display packets before sending them
`-k\|--keypress\|+k\|--no-keypress`	press a key for each packet
`-d\|--device device`	device for spoof (if dlt!=raw)	Eth0
`-i\|--spoofip spoofip`	ip spoof type (if dlt==raw)	best

Examples:

netwox 14 -f "srcfile.txt"

netwox 14 --file "srcfile.txt"